Printing Sleeves &
Adaptors..
SLEEVE OPTIONS:
RUBBER SEALED EDGES WITH REINFORCED SLOT
Increases the lifetime of a sleeve by making the end of the sleeve resistant to impact. Prevents damages to the positioning pins in the press and mounting machines without weakening the registration slot.
SMART SLEEVE (RFID CHIP & MAGNET)
RFID embedded sleeve which allows reading and writing for the purpose of identification. Works with the new and our existing systems. It improves the printing process and prevents mistakes from using the wrong sleeves in the press.
CONDUCTIVE SLEEVE
All the sleeves from Tech Sleeves can become conductive sleeves with the use of carbon. Conductive sleeves conduct electrostatic charges, which can occur in the printing area and go into the grounded printing press. Many companies choose this type of sleeves for printing.
SLEEVE & BRIDGE BUILD-UP
1 - Base Layer
• Expandable strong inner core without cracking. It prevents slipping on the mandrel.
• This inner core is 100% moisture, UV light and chemical resistant.
2 - Compressible Layer
• This layer enables the sleeve to expand and retract for a smooth fit onto the cylinder or bridge.
• Due to the edges of our sleeves being completely sealed, this layer is always fully protected.
3 - Tech Core Light Layer
• Lightweight core material designed to limit bounce and maximize the durability of the sleeve.
• Allows sleeve build-ups to all wall thicknesses and offers the lightest sleeves on the market.
4 - UV-cured Vinyl Ester resin outer layer
• Guaranteed 82 Shore D outer layer hardness, which is significantly higher than market standard.
• This outer layer offers an extremely stiff, long-lasting firm sleeve with excellent tape adhesion properties.
